Best guide to delete Retrievedata ransomware
Retrievedata ransomware is a ransomware-type program also known as Retrievedata virus. This pesky threat is able to infect any Windows PC without user’s knowledge. Once installed successfully, it can scan the entire system for files and encrypts them all by using a powerful algorithm. Once done, files are appended with the “.retrievedata300@gmailcom” extension which shows that they are locked and can’t be accessed without a decryption key.
Afterwards, a ransom note named help_data.txt is created and dropped on the system screen to inform the victim about the encryption and demands the ransom money. As usual, the created text file informs victims that all their files are encrypted and in order to decrypt it you need to purchase decryption tool from the cyber criminals by paying 300 USD in Bitcoin cryptocurrency.
To get such key, victims are instructed to contact criminals through the provided email address. Once the payment is made, the note instructs to send proof of the transactions to the attackers email. Further, victims are also warned not to rename encrypted files by using third party software or try to decrypt those files manually otherwise it may cause permanent data loss.
Further, it will promise to give you the decryption key once payments are submitted. However, their main intention is not to provide you decryption key because most of its victims complaints that they could not recover their files even after paying the ransom. As a result, you are advised not to contact cyber criminals and pay any ransom amount to them.
To prevent it from further encryptions, you are advised to remove Retrievedata ransomware as soon as possible from the system. Unluckily, removal will not retrieve already affected files. The only sole solution is recovering the data from a backup (if one was created before the attack). In order to avoid permanent data loss, it is recommended to keep backups in unplugged storage devices.
Intrusion methods of Retrievedata ransomware:
How to avoid installation of ransomware virus?
- Always install programs from official websites or direct download links.
- Avoid clicking on malicious links and visiting commercial site.
- Don’t try to download and install freeware programs from unofficial webpage.
- You must ignore the attachment of spam mail file which receive through unknown sender.
- Read the installation guide carefully till the end and don’t skip custom or advance settings.
Text presented in Retrievedata ransomware’s text file (“help_data.txt”):
All of your files have been encrypted!
The harddisks of your computer have been encrypted with an military grade
encryption algorithm. There is no way to restore your data without a special
key Delta Plus.
To purchase your key and restore your data, please follow these three easy
- The price for the software is $300 USD.
Payment can be made in Bitcoin only.
- Bitcoin Address: bc1qw0ll8p9m8uezhqhyd7z459ajrk722yn8c5j4fg
- You receive your key within 20 minutes:
Once paid, send payment photo:
Ransomware removal and Data recovery solution [Automatic method]
Ransomware-types malware are designed to lock all files stored in your computer hard drive, and demands ransom payment for decryption. Note that you should not try to recover your files from their fake decryption keys or software. They are not going to decrypt or recover your files even when ransom money is paid. We recommended you to remove Retrievedata ransomware and related components from System at first, and then you should try to restore your encrypted files from backup.
To remove ransomware-types malware from Windows device, you can use some powerful antivirus software like ‘SpyHunter’. This security software is designed to detect all types of malware including adware, PUAs, Trojan horse virus, worms, ransomware and other harmful malware and remove them permanently. So in case if your System is already infected with Retrievedata ransomware or related malware, then you can ‘perform System scan for malware or viruses’ using ‘SpyHunter’ – powerful antivirus software. After ransomware removal, you can use “Stellar Windows Data Recovery Software” to recover your encrypted files.
About SpyHunter – powerful antivirus software:
“SpyHunter” is one of the best Third-Party and powerful security software designed to detect all types of malware or viruses including Ransomware, and removes them permanently. It works on advanced scanning mechanism to identify viruses quickly. This security software is in-built with improved ‘Multi-Layer’ process that helps you to find all types of malware.
SpyHunter antivirus software offers user-friendly interface with ‘24 X 7’ Customer support, HelpDesk Customer service, and the support teams delivers custom malware fixes with the help of HelpDesk Feature. So, you can try “SpyHunter” security tool to remove ransomware-types malware completely from Windows device.
How to download and install SpyHunter – antimalware software?
Step 1: At first, you need to visit “SpyHunter Official website” and download ‘SpyHunter’ antivirus. Or you can download ‘SpyHunter’ security software by clicking ‘Download’ button below, and save the ‘Setup file’ in your computer hard drive.
Step 2: Double-click “Setup file” or “SpyHunter-Installer file” and follow on-screen instructions to install.
Scan the PC for malware or viruses using ‘SpyHunter’:
Step 1: Now, open “SpyHunter” software and click on “Start Scan Now” button to start scanning process. For the first time, you should choose “Full Scan” option.
Step 2: Click on “View Scan Results” to see the list of detected threats
Step 3: After that, click on “Next” button to register the software and remove permanently if you find Retrievedata ransomware or similar malware.
Recover all files encrypted by ransomware using ‘Stellar Windows Data Recovery Software’
“Stellar Windows Data Recovery Software” is designed to retrieve deleted or lost files from PC or external hard drive. You can easily get back your data from corrupt or malware infected drive using this data recovery software. It also offers data recovery support up to 1GB lost or deleted data on Windows for free.
Stellar Data Recovery Software recovers all major types and formats of files including photos, videos, documents, email data files, etc. It is capable of retrieving data from PC, laptop, hard drive and USB drives. However, you will be also able to recover files lost due to drive formatting or corruption.
Features of Stellar Windows Data Recovery Software:
Recover your data with easy steps: This data recovery software can recover your data with just few steps. You need to open this data recovery software in computer, select the storage drive & file type, scan the drive and then save the recovered files.
Retrieve any types of files: ‘Stellar Data Recovery Software’ offer you to do free data recovery of digital photos and videos, audio library, PowerPoint Deck, PDF, Word document, Excel workbook, email file and more. It also saves you from spending you time on multiple applications by offering a universal or All-in-One solution for free.
Retrieve data from formatted drive: If you have lost your personal data after formatting a USB drive, SD card or partition on your Windows device, then you can use ‘Stellar Windows Data Recovery Software’ to recovery of data from such drives.
Preview files before you save them: This data recovery software features ‘Files Preview’ let you see image thumbnails, play clipping of videos & view contents of document before you save them. After scanning storage drive or partition, you can see the ‘File Preview’ of recoverable file before you save them.
Recover data from ‘BitLocker’ encrypted drive: ‘Stellar Windows Data Recovery Software’ can retrieve the data lost or deleted from ‘BitLocker’ encrypted drive. At first you have to enter BitLocker decryption key and then run the software to scan the decrypted drive. It will recover your lost data from encrypted drive.
Recover files from corrupted volume: If you are unable to access a drive or partition on Windows, and getting message asking you to format the drive, then you can use this software restore files from such drives. Don’t format it yet! The drive or partition has turned ‘RAW’ possibly due to a damaged or corrupted file System. In this case, you can get back data from such corrupted drive or volume by using this data recovery software.
How to download and install “Stellar Windows Data Recovery Software”?
Step 1: At first, you need to visit official website of ‘Stellar Windows Data Recovery Software’ and download the software. Or you can download the software by clicking “Download” button below.
Step 2: Now, double-click on ‘Setup file’ or ‘Installer file’ and follow on-screen instructions to finish installation.
Recover files locked by Retrievedata ransomware using ‘Stellar Data recovery software’
Step 1: Open the Stellar Data recovery software, select the file types you want to recover. You can choose any option from ‘Office document’, ‘Folders’, ‘Emails’, ‘Photos’, ‘Audios’, ‘Videos’ and ‘All Data’ to recover, and then hit “Next” button
Step 2: You can select the ‘Drives’ on which you want the software to run and execute the recovery process. Then click on “Scan” button
Step 3: Wait to complete the process. It may take time depending on the volume of selected drive and number of files. Once done, the screen with ‘Preview of data’ appears that is to be recovered. Select the files that you want to restore.
Step 4: Now, browse the location where you want to save the recovered files.
Remove Retrievedata ransomware or similar malware and Recover files locked by ransomware [Manual Method]
The above methods are all about automatic method of ransomware removal and data recovery, which helps you to remove infections from machine completely and get back your lost or encrypted data with just few steps. However, if you don’t want to fix this problem using automatic method, then you can try manual method.
“Manual Method of ransomware removal and data recovery” requires a lot of technical skills to implement all necessary steps. It is time consuming process and if any steps you missed or skips, can trigger other System issues. So, you should be careful while following steps to remove ransomware and recover data manually. Let’s go for the solution.
How to delete Retrievedata ransomware and recover decrypted data using ‘Safe Mode with Networking’?
Step 1: At first, you need to restart your computer and press “F8” key several times until you see “Advanced Boot Options” screen
Step 2: On “Advanced Boot Options” screen, select ‘Safe Mode with Networking’ in the list
Step 3: Now, log into your computer with ‘Safe Mode with Networking’
Step 4: After that, perform System scan for malware or viruses using ‘SpyHunter’ – powerful antivirus software. This will delete all types of malware including Retrievedata ransomware or similar malware from computer.
How to remove ransomware-type malware and restore files, using ‘Safe Mode with Command Prompt’ and ‘System Restore’?
Step 1: Reboot your computer and press “F8” key several times until ‘Advanced Boot Options’ screen appears
Step 2: Select “Safe Mode with Command Prompt” option in the list
Step 3: In the opened “Command Prompt” window, type “cd restore” command and hit “Enter” key to execute
Step 4: After that, type “rstrui.exe” command and hit “Enter” key to execute t0 open “System Restore” window.
Step 4: In the opened “System Restore” window, click on “Next”
Step 5: Select one of available ‘Restore Points’ and click “Next”
Step 6: Click on “Yes” button on the confirmation dialog box to start restoring process
Step 7: After restoring your System to selected restore point, perform System scan for malware or viruses using ‘SpyHunter’ – powerful antivirus software to remove any remaining malicious files related to Retrievedata ransomware.
How to restore files locked by Retrievedata ransomware using ‘Windows Previous version’ feature?
This method will help you to restore all files locked by ransomware using ‘Windows Previous version’ feature, which usually saves the ‘Shadow Volume Copies’ of the files. Note that this step is only effective when ‘System Restore’ function is enabled.
Step 1: To restore a file, right-click on it and select “Properties”
Step 2: In the opened “Properties” window, click on “Previous Versions” tab
Step 3: Select the relevant ‘restore point’ under “Folder/File Versions” section, and then hit “Restore” button.
Step 4: You can also try ‘Shadow Explorer’ software to access the files locked by ransomware. To get more information about ‘Shadow Explorer’, you can visit their official webpage by clicking ‘Here’.
How can you stop Ransomware?
You should have powerful protections in place before ransomware can infect your computer. The best way for devices to stop ransomware attacks is to proactive in your security approach. It means you should have very strong antivirus software like ‘SpyHunter’ that could help you to stop ransomware attack. This type of security tool installed in your computer can block malware from infecting your System. Note that updated security tools can detect all types of threats including latest malware. So, you should keep up-to-date your security software, and run the scan for malware or viruses regularly.
This Security Software can also help protect against malicious downloads, alerts you when you are visiting any risky websites or downloading suspicious files/applications. However, if your System is already infected with malware or viruses, then it will detect and delete them in your computer by performing System scan.
If you are unaware, ransomware-type malware is commonly distributed through spam or irrelevant emails. So, email security is crucial to stop ransomware. Most of the email services offer “Anti-Spam Filter” feature that identifies spammy emails and prevent them from delivering to ‘Inbox’ folder. This feature when enabled, all the spammy emails automatically delivers to ‘Spam’ folder of your mail service you use. By default, ‘Anti-Spam Filter’ feature is enabled in Gmail – Google mail service. You can also enable this feature using some powerful antivirus software.
However it is strongly recommended not to open any attachments or hyperlinks presented in spam or irrelevant emails. You should also try to blocks the senders’ email addresses from sending spam emails. Note that scammers or attackers can also try to send spam emails using another email addresses even when you block previous one. So, the best option to stop ransomware that can come through spam emails, is to simply avoid opening the emails and report them if you want.
On other hand, ransomware-type malware can also come through phishing, scam or untrustworthy websites. These suspicious sites attempt to tricks you into downloading malicious files or applications in your device. So, you should be alert while browsing internet and avoid visiting such untrustworthy sites. You can also use ‘DNS Web Filter’ tool that could help you to block viruses that spread ransomware from being downloaded from the internet. This tool can also block malicious third-party adverts, block threats, and stop you from visiting dangerous or unknown domains.